| Measuring Principle | Coriolis | |
| Product Headline | Flowmeter with minimized total cost of ownership and a compact, easily accessible transmitter.
Accurate measurement of liquids and gases for a wide range of standard applications. | |
| Sensor features | Cost‐effective – multi‐purpose device; an alternative to conventional volumetric flowmeters. Fewer process measuring points – multivariable measurement (flow, density, temperature). Space‐saving installation – no in-/outlet run needs.
Compact dual-tube sensor. Medium temperature up to +150 °C (+302 °F). | |
| Transmitter features | Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology.
Process pressure up to 100 bar (1450 psi). Compact dual-compartment housing with up to 3 I/Os. Backlit display with touch control and WLAN access. | |
| Measuring Principle | Coriolis | |
| Product headline | Flowmeter with minimized total cost of ownership and a compact, easily accessible transmitter.
Accurate measurement of liquids and gases for a wide range of standard applications. | |
| Sensor features | Cost‐effective – multi‐purpose device; an alternative to conventional volumetric flowmeters. Fewer process measuring points – multivariable measurement (flow, density, temperature). Space‐saving installation – no in-/outlet run needs.
Compact dual-tube sensor. Medium temperature up to +150 °C (+302 °F). | |
| Transmitter features | Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology.
Process pressure up to 100 bar (1450 psi). Compact dual-compartment housing with up to 3 I/Os. Backlit display with touch control and WLAN access. | |
| Nominal diameter range | DN 8 to 80 (⅜ to 3") | |
| Wetted materials | Measuring tube: 1.4539 (904L) Connection: 1.4404 (316/316L) | |
| Measured variables | Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration | |
| Max. measurement error | Mass flow (liquid): ±0.15 % (standard), ±0.10 % (option) Volume flow (liquid): ±0.15 % Mass flow (gas): ±0.50 % Density (liquid): ±0.0005 g/cm³ | |
| Measuring range | 0 to 180 000 kg/h (0 to 6615 lb/min) | |
| Max. process pressure | PN 100, Class 600, 63K | |
| Medium temperature range | –40 to +150 °C (–40 to +302 °F) | |
| Ambient temperature range | Standard: –40 to +60 °C (–40 to +140 °F) Option: –50 to +60 °C (–58 to +140 °F) | |
| Sensor housing material | 1.4301 (304), corrosion resistant | |
| Transmitter housing material | AlSi10Mg, coated; stainless steel for hygenic transmitter design | |
| Degree of protection | Standard: IP66/67, Type 4X enclosure IP69 | |
| Display/Operation | 4-line backlit display with touch control (operation from outside) Configuration via local display and operating tools possible Remote display available" | |
| Outputs | 3 outputs: 4-20 mA HART (active/passive) 4-20 mA WirelessHART 4-20 mA (active/passive) Pulse/frequency/switch output (active/passive) Double pulse output (active/passive) Relay output | |
| Inputs | Status input 4-20 mA input | |
| Digital communication | HART, PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, Modbus RS485, MODBUS TCP over Ethernet-APL, PROFINET, PROFINET over Ethernet-APL, Ethernet/IP, OPC-UA | |
| Power supply | DC 24 V AC 100 to 230 V AC 100 to 230 V / DC 24 V (non-hazardous area) | |
| Hazardous area approvals | ATEX, IECEx, cCSAus, NEPSI, INMETRO, EAC, UK Ex, KC | |
| Product safety | CE, C-tick, EAC marking | |
| Functional safety | Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511 | |
| Metrological approvals and certificates | Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025) Heartbeat Technology complies with the requirements for measurement traceability according to ISO 9001:2015 – Section 7.1.5.2 a (TÜV SÜD attestation) | |
| Marine approvals and certificates | LR approval, DNV approval, ABS approval, BV approval, CCS approval | |
| Pressure approvals and certificates | PED, CRN | |
| Material certificates | 3.1 material | |
| Hygienic approvals and certificates | 3-A, EHEDG, cGMP | |
| Measuring Principle | Coriolis | |
| Product headline | Flowmeter with minimized total cost of ownership and a compact, easily accessible transmitter.
Accurate measurement of liquids and gases for a wide range of standard applications. | |
| Sensor features | Cost‐effective – multi‐purpose device; an alternative to conventional volumetric flowmeters. Fewer process measuring points – multivariable measurement (flow, density, temperature). Space‐saving installation – no in-/outlet run needs.
Compact dual-tube sensor. Medium temperature up to +150 °C (+302 °F). | |
| Transmitter features | Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology.
Process pressure up to 100 bar (1450 psi). Compact dual-compartment housing with up to 3 I/Os. Backlit display with touch control and WLAN access. | |
| Nominal diameter range | DN 8 to 80 (⅜ to 3") | |
| Wetted materials | Measuring tube: 1.4539 (904L)
Connection: 1.4404 (316/316L) | |
| Measured variables | Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration | |
| Max. measurement error | Mass flow (liquid): ±0.15 % (standard), ±0.10 % (option) Volume flow (liquid): ±0.15 % Mass flow (gas): ±0.50 % Density (liquid): ±0.0005 g/cm³ | |
| Measuring range | 0 to 180 000 kg/h (0 to 6615 lb/min) | |
| Max. process pressure | PN 100, Class 600, 63K | |
| Medium temperature range | –40 to +150 °C (–40 to +302 °F) | |
| Ambient temperature range | Standard: –40 to +60 °C (–40 to +140 °F)
Option: –50 to +60 °C (–58 to +140 °F) | |
| Sensor housing material | 1.4301 (304), corrosion resistant | |
| Transmitter housing material | AlSi10Mg, coated; stainless steel for hygenic transmitter design | |
| Degree of protection | Standard: IP66/67, Type 4X enclosure
IP69 | |
| Display/Operation | 4-line backlit display with touch control (operation from outside)
Configuration via local display and operating tools possible Remote display available" | |
| Outputs | 3 outputs:
4-20 mA HART (active/passive) 4-20 mA WirelessHART 4-20 mA (active/passive) Pulse/frequency/switch output (active/passive) Double pulse output (active/passive) Relay output | |
| Inputs | Status input
4-20 mA input | |
| Digital communication | HART, PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, Modbus RS485, MODBUS TCP over Ethernet-APL, PROFINET, PROFINET over Ethernet-APL, Ethernet/IP, OPC-UA | |
| Power supply | DC 24 V
AC 100 to 230 V AC 100 to 230 V / DC 24 V (non-hazardous area) | |
| Hazardous area approvals | ATEX, IECEx, cCSAus, NEPSI, INMETRO, EAC, UK Ex, KC | |
| Product safety | CE, C-tick, EAC marking | |
| Functional safety | Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511 | |
| Metrological approvals and certificates | Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)
Heartbeat Technology complies with the requirements for measurement traceability according to ISO 9001:2015 – Section 7.1.5.2 a (TÜV SÜD attestation) | |
| Marine approvals and certificates | LR approval, DNV approval, ABS approval, BV approval, CCS approval | |
| Pressure approvals and certificates | PED, CRN | |
| Material certificates | 3.1 material | |
| Hygienic approvals and certificates | 3-A, EHEDG, cGMP | |
| Measuring Principle | Coriolis | |
| Product headline | Flowmeter with minimized total cost of ownership and a compact, easily accessible transmitter.
Accurate measurement of liquids and gases for a wide range of standard applications. | |
| Sensor features | Cost‐effective – multi‐purpose device; an alternative to conventional volumetric flowmeters. Fewer process measuring points – multivariable measurement (flow, density, temperature). Space‐saving installation – no in-/outlet run needs.
Compact dual-tube sensor. Medium temperature up to +150 °C (+302 °F). | |
| Transmitter features | Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology.
Process pressure up to 100 bar (1450 psi). Compact dual-compartment housing with up to 3 I/Os. Backlit display with touch control and WLAN access. | |
| Nominal diameter range | DN 8 to 80 (⅜ to 3") | |
| Wetted materials | Measuring tube: 1.4539 (904L)
Connection: 1.4404 (316/316L) | |
| Measured variables | Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration | |
| Max. measurement error | Mass flow (liquid): ±0.15 % (standard), ±0.10 % (option) Volume flow (liquid): ±0.15 % Mass flow (gas): ±0.50 % Density (liquid): ±0.0005 g/cm³ | |
| Measuring range | 0 to 180 000 kg/h (0 to 6615 lb/min) | |
| Max. process pressure | PN 100, Class 600, 63K | |
| Medium temperature range | –40 to +150 °C (–40 to +302 °F) | |
| Ambient temperature range | Standard: –40 to +60 °C (–40 to +140 °F)
Option: –50 to +60 °C (–58 to +140 °F) | |
| Sensor housing material | 1.4301 (304), corrosion resistant | |
| Transmitter housing material | AlSi10Mg, coated; stainless steel for hygenic transmitter design | |
| Degree of protection | Standard: IP66/67, Type 4X enclosure
IP69 | |
| Display/Operation | 4-line backlit display with touch control (operation from outside)
Configuration via local display and operating tools possible Remote display available" | |
| Outputs | 3 outputs:
4-20 mA HART (active/passive) 4-20 mA WirelessHART 4-20 mA (active/passive) Pulse/frequency/switch output (active/passive) Double pulse output (active/passive) Relay output | |
| Inputs | Status input
4-20 mA input | |
| Digital communication | HART, PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, Modbus RS485, MODBUS TCP over Ethernet-APL, PROFINET, PROFINET over Ethernet-APL, Ethernet/IP, OPC-UA | |
| Power supply | DC 24 V
AC 100 to 230 V AC 100 to 230 V / DC 24 V (non-hazardous area) | |
| Hazardous area approvals | ATEX, IECEx, cCSAus, NEPSI, INMETRO, EAC, UK Ex, KC | |
| Product safety | CE, C-tick, EAC marking | |
| Functional safety | Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511 | |
| Metrological approvals and certificates | Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)
Heartbeat Technology complies with the requirements for measurement traceability according to ISO 9001:2015 – Section 7.1.5.2 a (TÜV SÜD attestation) | |
| Marine approvals and certificates | LR approval, DNV approval, ABS approval, BV approval, CCS approval | |
| Pressure approvals and certificates | PED, CRN | |
| Material certificates | 3.1 material | |
| Hygienic approvals and certificates | 3-A, EHEDG, cGMP | |
| Measuring Principle | Coriolis | |
| Product headline | Flowmeter with minimized total cost of ownership and a compact, easily accessible transmitter.
Accurate measurement of liquids and gases for a wide range of standard applications. | |
| Marine approvals and certificates | LR approval, DNV approval, ABS approval, BV approval | |